07 BUZZER VOLUME: This function sets the volume of the various beep and alarm tones your MFP machine emits during operations. Available settings are low, middle and high.
08 CLOSED NETWORK: This function allows you to program your MFP machine to refuse to receive faxes from or transmit faxes to locations whose telephone numbers have not been programmed into your MFP machine’s
09 TX MODE DEFAULT: This function allows you to change your MFP machine’s default type of original and transmit resolution settings.
Unless you select otherwise using the Transmit Resolution/ | YES | or | ||
Type of Original/ |
| , your MFP machine is set to use the STD | ||
NO |
and NORMAL settings. If you are constantly sending faxes, which require some other combination of transmission modes, use this function setting to change the default transmission modes to any other combination of settings. While you are programming, the new default combinations appear on the LEDs above the Transmit Resolution/
YES | or Type of Original/ | NO | . |
10 T/F TIMER PROG.: When set to the telephone/ fax answering mode, your MFP machine automatically distinguishes between incom- ing voice and fax calls. If the incoming call is a voice call, your MFP machine rings to tell you to pick up the handset. If you do not answer, your MFP machine automatically switches back to facsimile mode to allow the calling party to send a fax. The T/F TIMER function controls how long your MFP machine waits before switching back to fax mode. Available settings are 20 seconds or 35 seconds.
Programming 67