Power Failures and Memory
If power is interrupted to your MFP machine, the following problems occur:
-Any messages your MFP machine has scanned into memory but not yet transmitted are lost.
-Any messages your MFP machine has received into memory but not yet printed are lost.
-If you have loaded documents on your MFP machine’s document feeder, any dialing or transmission settings are lost.
Your MFP machine prints a power off report to inform you in the event of a power failure. Use this report to determine which received messages you may have lost, and to determine which transmissions you may have to resend. See the Reports section for more information.
Making Copies
Your MFP machine can also be used to make copies. You can make up to 50 copies at one time. Your MFP machine automatically makes all copies in FINE mode.
1Load your documents.
2Press the COPY key. The display shows PRG. NO. OF COPIES, [1SETS]. If you want to make just one copy, you are finished. Your MFP machine waits a moment, then begins copying.
3To make multiple copies, enter the number of copies you want to make on the numeric keypad. Then press the COPY key again. Your MFP machine begin making copies.
Tip: When the message PRG. NO OF COPIES is displayed, you can change the degree of print resolution.
Basic Operations 49