Teac AG-10DAV Standby indicator, Speaker indicator, Display, Remote Sensor, Video 3 Input jacks

ASTANDBY/ON

When the POWER switch of the main unit is depressed, use this button to turn the unit on or standby.

BPOWER

Press this switch to turn the unit standby or off.

The equipment draws nominal non-operating power from the AC outlet with its POWER switch in the OFF position.

CFUNCTION

Use this knob (or buttons of the remote control unit) to select a source.

D7CH DIRECT

Use this button to select the source connected to the 7CH

DIRECT INPUTS.

EStandby indicator

This indicator lights when the unit is in the standby mode. When the unit is turned on, it goes off.

FSpeaker indicator

This indicator lights when the SPEAKER button is set to on.

GDIGITAL INPUTS

Use this button to select one of the digital input terminals.

HDYNAMIC RANGE

Use this button to compress the dynamic range during playback of a disc recorded in Dolby Digital.

ICINEMA EQ

Use this button to turn on or off the cinema equalizer.

JDisplay

When the unit is on, the current status of the unit is displayed.

KRemote Sensor

When operating the remote control unit, point it towards the remote sensor.

LButtons for RDS function (European models only)

In FM tuner mode, use these buttons for RDS function. RDS is available in European countries only.

MMASTER VOLUME

Turn this knob (or press the VOLUME buttons of the remote control unit) to adjust the master volume.

NVIDEO 3 INPUT jacks

You can connect a component such as a portable CD, game player, etc. to these jacks.

When using these jacks, remove the cap. When you don't use them, leave the cap in place.

OBAND

Use this button to select FM or AM.

PTUNING/PRESET

In the manual tuning mode, use these buttons to tune in a station.

In the preset tuning mode, use these buttons to select a preset channel.

QFM MODE

In FM tuner mode, use this button to select stereo or monaural.

RMEMORY

Use this button to store preset channels into memory.

STUNING MODE

Use this button to select the manual tuning mode or the preset tuning mode.

TPRO LOGIC II MUSIC PARAMETER

Use this button to change parameters of DOLBY PRO LOGIC II MUSIC.

USTEREO

Use this button to select stereo mode. Sound is output only from the front speakers (and the sub-woofer).

VPower indicator

This indicator lights when the unit is on.

WDSP

Use these buttons to select a surround mode.

XAUTO

Use this button to change the decoding mode of digital signals.

YSPEAKER SETUP

Use this button to start speaker configuration.

ZSELECT/LEVEL

Use these buttons to adjust the level of each speaker, etc.

aTONE MODE

Use this button to select a tone mode.

bCHANNEL SELECTOR

Select a speaker by pressing this button repeatedly, and adjust the level using the LEVEL buttons.

cSPEAKER

Use this button to turn on or off the speakers. on : Sound is output from the speakers.

off : No sound is output from the speakers.

dPHONES

For private listening, insert the headphones plug into this jack, and adjust the volume by turning the MASTER VOLUME knob.

ENGLISH 21