Teac AG-10DAV Dolby PRO Logic II Music parameters, Pano C-WID Dimen, WID center width control

3 1 2

1

2

3

68

DOLBY PRO LOGIC II MUSIC parameters

You can adjust the parameters for DOLBY PRO LOGIC II MUSIC.

1Select DOLBY PRO LOGIC II MUSIC mode by pressing the DSP button.

2Select the parameter to be changed by pressing the PRO LOGIC II MUSIC PARAMETER button.

Each time the PRO LOGIC II MUSIC PARAMETER button is pressed, the parameter is changed as follows:

PANO C-WID DIMEN

3Within 8 seconds, press the SELECT button to change the value.

PANO (panorama):

This mode extends the front stereo image to include the surround speakers for an exciting wraparound effect with side wall imaging. Select "ON" or "OFF".

The default setting is "OFF".

C-WID (center width control):

This adjusts the center image so it may be heard only from the center speaker, only from the left/right speakers as a phantom image, or from all three front speakers to varying degrees.

The adjustable range is from 0 to 7. The default setting is "0".

DIMEN (dimension control):

This adjusts the sound-field either towards the front or towards the rear. The adjustable range is from -4 to +2. The default setting is "0".

Repeat step 2 and 3 to adjust other parameters.

When all the configurations have been finished, leave the unit for 8 seconds to exit.

ENGLISH