Teac AG-10DAV owner manual Battery Installation, Front Panel Display, Battery Replacement

Front Panel Display

a	b	c	d	e		f		g
		l			k	j	i	h

adisplays current status.

billuminates when RDS function is active.

cilluminates when the multi-channel sound is downmixed to stereo, or when an FM stereo broadcast is tuned.

dilluminates when a station is tuned.

eilluminates when tone control is set to off.

filluminates when preset tuning mode is selected.

gblinks when the MEMORY button is pressed.

hmeter

iilluminates when sleep timer is set.

jilluminates or blinks when a digital source is selected.

killuminates when the decoding mode is set to "IN-AUTO".

lsurround mode

Battery Installation

1Remove the battery compartment cover.

2Insert two “AAA“ (R03, UM-4) dry batteries. Make sure that the batteries are inserted with their positive “+“ and negative “_“ poles positioned correctly.

3Close the cover.

Battery Replacement

If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. In this case replace the batteries with new ones.

Precautions concerning batteries

<Be sure to insert the batteries with correct positive “+“ and negative “_“ polarities.

<Use batteries of the same type. Never use different types of batteries together.

<Rechargeable and non-rechargeable batteries can be used. Refer to the precautions on their labels.

<When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones.

<Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.

ENGLISH 23