Setting Flash Time
1Press and release MENU button until FLASH is shown
2 Press the DIAL button.
3 Select the desired flash time using the 
or 
and confirm by pressing the DIAL button.
4 Press the button to exit the
Setting Tone /Pulse Dialing Mode
You can select the required dialing type Tone/Pulse 40/60.
1Press and release the MENU button until Tone/Pulse is shown.
2Press the DIAL button.
3Select the required dialing type using the 
or 
and confirm with DIAL button.
4Press 
button to exit the
Setting Ringer Volume Control
The ringer sound level can be adjusted by sliding the RINGER switch to select Hi, Mid and Lo level.
The red bright LED will flash with all incoming calls.
Setting The Handset Volume Control
The Boost LED is used to reflect the handset extra volume setting. 1 Press the RED +40dB BOOST button, the Boost LED will turn ON.
2Increase the handset volume by turning the volume control wheel to select the listening level (level 1 to level 9).
3During the conversation, you may turn OFF the Boost by pressing the RED +40dB BOOST button, the Boost LED will turn OFF and the sound level will return to normal.
4 When you hang up, the phone will reset to normal sound level.
Note: Choose not to press the RED +40dB BOOST button and the Boost LED will remain OFF. This is the setting to use for people who do not require the level of amplification and tone control offered on the phone.
Setting Tone Control (TONE HI/LO)
The Tone control allows you to fit your specific hearing needs, so words are clearer and easier to understand. Slide the Tone control DOWN to boost the lower frequency range. Slide the Tone control UP to boost the high frequency range. Note: The tone control function will not be effective when the Boost LED is OFF
7 – ENGLISH