1 Pick up the handset or press button (the speaker LED will light) and wait for a dial tone.
2 Press and release 
button, until icon is shown.
3Review the stored phone number by pressing 
or 
.
4Press DIAL button.
Recording / Editing / Deleting Voice Prompt Of Name
In Phonebook
With Caller ID service activated, when an incoming call is received, the unit will display and announce the caller’s phone number. If the caller’s phone number is stored in the phonebook, caller’s name will be displayed too.
If the voice prompt is recorded for this phone number, the unit will announce the voice prompt recorded instead of the caller’s phone number.
1Press and release the MENU button until the “NAME RECORDING” is shown.
2Press the DIAL button. A list of the phone book entries will be display.
3Press 
or 
, to select the list you like to record a voice or name for it.
4To record or edit the voice, hold down DIAL button. Speak clearly into the microphone after a beep and “VOICE” icon flashing. Release the button when you are finished or the unit will stop recording after 3 seconds. The new voice prompt will then be played automatically.
Note: To delete the voice prompt recorded, press DELETE button while the voice prompt is playing.
Repeat step 3 to 4 to edit or delete more entries or exit the
mode by pressing the 
button. To Edit The Phonebook Memory
1 Press and release 
button, icon is shown.
2Select the required location from the phone book by pressing 
or 
.
3Press and hold MENU button for two seconds. The display will show EDIT?.
4Press DIAL button, the first digit of the selected phone number will flash.