Fuji Labs ZSP instruction manual Function and indication of indication/operation panel

7.2Function and indication of indication/operation panel

This panel consists of the following functions.

Key

▲FUNC

FUNC

FUNC

FUNC

FUNC

FUNC

FUNC

FUNC

FUNC

FUNC

FUNC

FUNC

ZERO

ZERO

Auto calibration (option)

Function	Main indication	Sub indication	Function indication lamp
Measuring mode	Measuring value	Range	MEAS lamp lights
Setting mode
Calib.conc.setting	Calb.conc.	Range	CAL SET lamp lights
Alarm setting (option)		Alarm value	ALM SET lamp flickers*
Hold setting		ON or OFF	HOLD lamp flicker
Remote range setting (option)		ON or OFF	RMT RANGE lamp flickers*
Current time setting	Hr.min.	Day	Auto CAL lamp flickers
Auto clib.start time setting	HR.min.	Day	AUTO CAL lamp flickers
Auto calib.cycle setting		Time	AUTO CAL lamp flickers
Calib. gas flow time setting		Time	AUTO CAL lamp flickers*
Calib. gas flow time setting		Mode No.	AUTO CAL lamp flickers*
Auto calib.changeover		ON or OFF	AUTO CAL lamp flickers
Key lock changeover		ON or OFF	*
Zero calibration	Measured value	Range	Zero key indication flickers
Span calibration	Measured value	Range	Span key indication flickers

•When the setting mode is assumed, the analog output signal is held at the value just before entering this mode.

•When optional functions are not provided, the contents of these functions are not indicated.

* Refer to the instruction manual of the infrared gas analyzer for the items marked by the asterisks.

– 8 –