5.2 Program Manager Functions

Copy button

Touch the Copy program button to copy one or more highlighted programs to the clip board. Copy works on the current program, or group of previously marked programs from the Mark program selection. The number of programs that were selected is shown in the lower right corner of the button.

Touching the Copy program button now activates the Paste program, and Move program buttons.

Touch and hold for two seconds on the Copy program button to empty the clip board. The Paste program, and Move program buttons will deactivate with this action.

To copy one program at a time using the Copy program button, first deactivate the Mark program button, then empty the clip board. Select the program that is to be placed on the clip board, and touch the Copy program button.

Paste Program button

Touch the Paste button to paste the copied program(s) that are on the clip board to the current folder.

Move Program button

Touch the Move button to move the program(s) that are on the clip board to another location. Moving a program(s) empties the clip board when this action is taken. The programs are deleted from its original location, and moved to the current location.

Delete button

Select a program, one or more, or a folder in the Explorer window, or in the programs window. A prompt appears to confirm deletion.

Touch the Delete button located on the side bar. The 3500i prompts to confirm the deletion and, the buttons change for the response

Select Yes, or No to cancel out of the delete dialogue.

94

5 Program Management

Page 119 Page 121
Page 120
Image 120
Acu-Rite CNC 3500i user manual Paste Program button
Page 119 Page 121
Top Page Image Contents