ACU-RITE 3500i 331
10.1 CAM Programming
Insert the following data in the dialogue fields on the pop-up
dialogue using the pop-up numeric pad, or the key board.
Start “X” field input 0.0.
Start “Y” field input 0.0.
Radius field input 0.25.
Touch Use on the pop-up dialogue, or Enter from the numeric key
pad.
The geometry of a .500” circle has now been created, located at
X 0.0, and Y 0.0 .
Repeat the previous steps to create another circle using the
following dimensions:
Start “X” field input 1.0.
Start “Y” field input 0.0.
Radius field input 0.25.
The geometry of a .500” circle located at X 0.0, and Y 0.0, and the
geometry of a .500” circle located at X 1.0, and Y 0.0 have now been
created.