ACU-RITE 3500i 325
10.1 CAM Programming
Setting up the Tool Table
To setup the Tool Table:
Select the Setup button. The CAM Setup dialogue opens.
Touch the right arrow key in the CAM Setup dialogue until the
Tool Table tab appears.
Select the Tool Table tab. The Tool Table opens in the CAM Setup
dialogue.
Touch inside a parameters field to enter a parameter.
Enter parameter value.
Touch the Enter button.
Repeat steps 4 and 5 until all required parameters are entered.
Select the Apply button to apply the changes without exiting or the
Use button to apply the changes and exit the Tool Table.
Importing a Tool Table
To Import a Tool Table:
Select the Setup button. The CAM Setup dialogue opens.
Touch the right arrow key in the CAM Setup dialogue until the
Tool Table tab appears.
Select the Tool Table tab. The Tool Table opens in the CAM Setup
dialogue.
Select the Import button. The Import Tool Table File pop-up dialogue
opens.
Browse to the location where the file you would like to import is
located and select it.
Select the Ok button.
Exporting a Tool Table
To export a Tool Table:
Select the Setup button. The CAM Setup dialogue opens.
Touch the right arrow key in the CAM Setup dialogue until the
Tool Table tab appears.
Select the Tool Table tab. The Tool Table opens in the CAM Setup
dialogue.
Select the Export button. The Export Tool Table File pop-up dialogue
opens.
Browse to the location where the file is to be saved.
Type the name of the file to save in the File Name field.
Select the Ok button.
Parameters highlighted in blue have been automatically
calculated. Calculations can be overridden by entering a
new value and touching ENTER.