Acu-Rite CNC 3500i user manual 209

Field	Code	Description
OvrSlw	S	This is the override for the slow feedrate
Feed		that was set in the machine setup
		parameter ZFirstPickFeedRate_Slow. This
		is used for the same reason as the M cycle
		parameter. This can only be set slower.
		Trying to set this higher will result in the
		software using the original feedrate.
		(Optional)
OvrRPM	R	This is the override for the RPM that was
		set in the machine setup parameter
		calibAndToolMeasurementRPM. This is
		used for the same reason as the M cycle
		parameter. This can only be set slower.
		Trying to set this higher will result in the
		software using the original RPM. If you
		would like the cycle to run without the
		spindle turning, enter a negative value in
		the "R" parameter. (Optional)

7.3 Probing Cycles

ACU-RITE 3500i 209