Acu-Rite CNC 3500i Program Editing, Mark a program block, Unmark a block, or blocks, 109

Program Editing

The feature edit buttons provided for editing a program offer assistance when editing. On screen functions, and a description of these buttons are describe here.

To save the changes made, touch the Exit button in the first button menu bar. To cancel out of the program without saving, touch the Quit button.

When in Edit mode to edit a program, touch the Edit Features button to access the Mark button.

Mark a program block:

For many editing features, the affected program block, or blocks must be marked before the edit is performed.

In Edit Mode, place the cursor at the beginning of the first block to be marked, and touch the Edit Features button.

 Touch the Mark button to Mark the block, or blocks.

Use the Arrow keys to mark additional blocks.

Unmark a block, or blocks:

In Edit Features, marked blocks will be unmarked from the current location of the cursor, to where it is relocated to.

Use the Arrow keys to unmark additional blocks, and text.

Touching the Mark button again to deactivate it will unmark all marked blocks.

When using a standard key board, use the shift key, and key board arrows to highlight multiple blocks. If a mouse is being used, hold down the mouse key, and drag the cursor to highlight multiple blocks.

6.1 Conversational Programming

ACU-RITE 3500i 109