7.2 Canned Cycles

Field

Code

Description

CornerRad

U

Corner radius setting. If the programmer

 

 

enters a negative value, both direction of

 

 

cut and the starting and endpoints reverse.

 

 

 

ZFeed

I

Z-axis feedrate.

 

 

 

Rough

J

Rough-pass feedrate.

Feed

 

 

 

 

 

FinFeed

K

Finish-pass feedrate.

 

 

 

DepthCut

B

Maximum Z-axis increment used for each

 

 

pass.

 

 

 

FinStock

S

Amount of stock left by the machine before

 

 

the finish pass. Default: 0. If the

 

 

programmer enters a negative value, the

 

 

CNC leaves the stock without making a

 

 

finish pass.

 

 

 

RetractHgt

P

Retract height.

 

 

 

When you enter a value, the CNC executes the number of passes required to get from the H (StartHgt) to the Z (ZDepth), cutting the B (DepthCut) on each pass.

When you enter an S (FinStock) value, the CNC leaves the specified stock on the profile and depth for a finish pass. The CNC cuts the rectangle to the M (Length), W (Width), and Z (ZDepth) dimensions on the finish pass. Enter a negative S (FinStock) to leave the finish stock without making a finish pass.

When you do not enter a J (RoughFeed) or K (FinFeed), the CNC executes feed moves at the current feedrate. J (RoughFeed) controls the feedrate of the roughing cycle. K (FinFeed) controls the feedrate of the finishing cycle.

G-code format: G172

168

7 Programming: Canned Cycles, sub-programs

Page 194
Image 194
Acu-Rite CNC 3500i user manual 168