11.1 G-Code Program Editing

11.1 G-Code Program Editing

The 3500i supports G-Code programming. This section provides an overview of G-Codes supported, and features available when using G-Codes.

Activating Edit Mode

Program blocks are written using the Edit button. When in the Program Manager, having the program selected, touch the Edit button. The program will open in the display, and can now be edited.

A program can also be edited from the Draw mode. This is also accessed through the Program Manager with a program selected. Touch the Draw button. When in Draw mode the Edit button is available for editing the Program. Touch the Edit button, and the program will open in the display, and can now be edited.

Use either of the following methods to enter Edit mode.

One:

Select the Program Management button.

Select the Folders button to locate the program for editing, and select the program.

Touch the Edit button in the bottom menu bar to enter the Edit mode.

Two:

Select the Program Management button.

Select the Folders button to locate the program for editing, and select the program.

Touch the Draw button in the bottom menu bar, to enter the Draw mode.

From the Draw Program, touch the Edit button in the bottom menu bar to enter the Edit mode.

350

11 G-Code Edit, Help, & Advanced Features

Page 375 Page 377
Page 376
Image 376
Acu-Rite CNC 3500i user manual Code Program Editing, Activating Edit Mode
Page 375 Page 377
Top Page Image Contents