Finalizing the geometry

Unwanted lines now need to be trimmed from the final shape. Select the geometry Trim button from the Modifying Toolbar to complete the geometry. See "Modifying Tools Buttons:" on page 307.

Select the Trim button from the Modifying Toolbar in the main Toolbar.

The Prompt bar will ask that the objects to be trimmed should be selected. Select the two circles.

The Prompt bar will ask what geometry the objects should be trimmed against. Select the two lines.

The Prompt bar will ask what objects to keep. Select the two outside radius. Available pieces of geometry highlight as the cursor hovers over it.

Now touch in an open area in the display. Both inside radius will be removed.

The geometry will now appear as one continuous line, radius at each end.

This geometry can now be used to create a shape which can then be used in a tool path for milling a pocket, or an island. Once defined, this can be copied, used as a pattern, array, or another application may apply.

Before creating the tool paths, the shape must be created as described here.

10.1 CAM Programming

ACU-RITE 3500i

317

Page 343
Image 343
Acu-Rite CNC 3500i user manual Finalizing the geometry, 317