342 10 CAM: Programming
10.1 CAM Programming
The screen now has three circles, and one tangent line on the two
smaller circles.
Finalizing the geometry
Unwanted geometry now needs to be trimmed from the final shape.
Select the Trim button from the Modifying Toolbar.
Select the Trim button from the Modifying Toolbar in
the main Toolbar.
The Prompt bar will ask that the objects to be trimmed should be
selected. Select the two smaller circles.
The Prompt bar will ask what geometry the objects should be
trimmed against. Select the large circle, and the line.
The Prompt bar will ask what objects to keep. Select the two
outside radius arcs of the smaller circles.
Now touch in an open area in the display. Both inside radius will be
removed.