Acu-Rite CNC 3500i user manual Deleting a program block, Inserting a program block

6.1 Conversational Programming

Deleting a program block:

There are two ways to delete program blocks from a Program Listing. The following provide the steps necessary to delete a block, or blocks.

In Edit Mode, place the cursor at the beginning of the first block to be deleted. Touch the Delete Block button to delete one block at a time.

The Cut button can also be used.

Touch the Edit Features button to access the next menu.

Touch the Cut button to remove the block, or blocks selected and place them on the clipboard.

If removing more than one block at a time is desired, first use one of the Mark methods described in “Mark a program block”. Highlight multiple blocks, then press the Cut button to remove them.

Inserting a program block:

Inserting a program block (or blocks) in an existing program is typically done by adding a feature at the correct location in the program.

Place the cursor where a new block is to be inserted.

Add the feature that is required at that location. See "Conversational Data Input Cycles" on page 103 which provides a list of features available.

110 6 Conversational Editing