298 10 CAM: Programming
10.1 CAM Programming
Pattern tab:
The Pattern tab must have the appropriate data filled in to use the
Pattern option in the Drill Location selection.
# X Holes: Enter the number of holes in X-axis.
# Y Holes: Enter the number of holes in Y-axis.
Style: Choose to use matrix pattern or perimeter pattern.
X Start: Enter the start position in the X-axis.
Y Start: Enter the start position in the Y-axis.
Y Increment: Enter the increment between holes in X-axis.
X Increment: Enter the increment between holes in Y-axis.
Angle: Enter the angle to rotate the hole pattern.
Comment tab:
To add a comment if needed that will be placed in program to assist
the operator. Typical to most dialogues.