Acu-Rite CNC 3500i user manual Order of Execution

11.4 Advanced Programming

M-Code	Function
M106	Dry Run, No Z Axis. M106 in a program
	or in MDI sets Dry Run (No Z) Mode. All
	feed moves are executed at a rate set by
	the builder, and all Z moves are ignored
	during the dry-run. This enables you to
	run through a program quickly, without
	Z-axis movement. M107 disables Dry
	Run, No Z Axis.
	NOTE: Making and saving a change to
	the Setup Utility cancels M106.
M107	Dry Run, Off - Cancel M105 and M106.
	This returns the 3500i to normal
	operating mode.

Order of Execution

The order of execution for available codes is as follows:

T, M, S, F, G, and XYZ (M98 P {sub call} is the exception).

sub-program call (M98 Pn) always executes last.

384 11 G-Code Edit, Help, & Advanced Features