Help Graphic Screens

The Edit Help allows a G-Code to be programmed using a form. The form contains parameters for the G-Code, and a graphic parameter aid for each.

When the 3500i activates a help graphic screen, its first entry field is highlighted. A highlight indicates that values can be typed in an entry field, or make the appropriate selection.

Press ENTER to move the highlight to the next entry field.

Press the Arrows to move the highlight between entry fields without typing values. Touch Clear to clear an entry field.

In the last entry field of the help graphic screen, touch Use to add the block to the Program Listing.

Touch Cancel to exit without making a change.

There are two types of entry fields:

Required entry fields contain a default value placeholder. A value must be typed in for operation of canned cycle, or other command.

If a new value is not entered for a required field, the 3500i writes the block using the 0.0000 default. This may generate an error message when the program runs.

Optional entry fields are blank, indicating that a value is only necessary if needed by the specific task.

Optional entry fields do not require a value. When left blank, a default value, or position is usually assumed.

Press the (+/-) key to insert a negative sign.

Touch the CLEAR key to clear an entry.

Remember: Using the Exit button saves all changes made. Quit a program, and the changes are not saved.

11.3 Edit Help

ACU-RITE 3500i

371

Page 397
Image 397
Acu-Rite CNC 3500i user manual Help Graphic Screens, 371