Acu-Rite CNC 3500i user manual Installation, Operation, Updating, 439

Installation

The software is installed in the usual manner by launching the setup program, selecting an installation destination, and choosing the desired features to be installed. Using the default setting for a "Complete" feature installation is highly recommended to ensure proper functionality. On some systems, you may be required to restart the computer after installation before the application will display properly.

Operation

Before using the off-line software, the USB protection dongle must be inserted into an available USB port on the computer. If no USB protection dongle is installed, the software will work in demo mode. In demo mode, the software will allow a certain number of usages, after which a dongle is required. The off-line software can be started by using either the "3500i Off-Line" shortcut created on your desktop during installation or from the Start menu. Once the software is running, it is operated in the same manner as the machine itself. Similarly, it should be shut down using the same sequence of selecting Shutdown and confirming Shutdown in the pop-up dialog. If for some reason the software becomes unresponsive, a force quit can be done using the "ShutDown 3500i" shortcut created on your desktop during installation or from the Start menu. Normal shutdown procedure should be used unless the force quit method is absolutely required.

Programs created in the off-line software can be copied to the CNC, and (with the correct setup) run on your machine.

Updating

It is not necessary to un-install the current installation before applying updates. Running the new setup program will update the existing installation to the newer version. Although your created part programs will remain intact, it is always recommended to make a backup of your programs and/or configurations before updating the software installation.

13.1 3500i Off-Line Software

ACU-RITE 3500i 439