Acu-Rite CNC 3500i user manual 183

Field	Code	Description
FinStock	S	Amount of stock left by the roughing
		passes for a finish pass. This amount
		applies to the sides and bottom unless R
		(SideStock) is defined; then, S (FinStock)
		only applies to the bottom. Default is no
		stock left.
SideStock	R	Amount of stock left by the roughing
		passes for a finish pass on the sides only.
		This amount overrides the value in S
		(FinStock). A value of zero can force stock
		to be left only on the bottom. Default is
		equal to S (FinStock).
RampFeed	I	The feedrate at which the tool will "ramp"
		into the pocket in all three axes. Default is
		last programmed feedrate.
Rough	J	Feedrate used during roughing passes.
Feed		Default is last programmed feedrate.
FinFeed	K	Feedrate used during finish passes. Default
		is last programmed feedrate.
RetractHgt	P	Z-axis absolute start and finish height (must
		be equal to or above "H"), used as a safety/
		clearance Z position before making X/Y
		moves. Executed in rapid at start and end of
		cycle. Defaults to current Z position at
		beginning of cycle.
Coarse	T	Number of tool used for previous roughing
Tool		cycle.
SkipRough	E	Yes = Roughing pass is skipped, only finish
		pass is performed.
		No = Roughing pass is performed. (Default)
SkipFinish	F	Yes = Finish pass is skipped, only rough
		pass is performed.
		No = Finish pass is performed. (Default)
FinishDir	Q	Select Cw or Ccw.

G-code format: G212

7.2 Canned Cycles

ACU-RITE 3500i 183