Acu-Rite CNC 3500i user manual 157

Field	Code	Description
FinFeed	K	XY axes finish feedrate. Defaults to last
		programmed feedrate.
FinStock	S	Finish-stock amount per side (including
		bottom). If not programmed, no finish stock
		is left.
Type	Q	Specifies the type of entry move;
		1=Line Tangent, 2=Line Perpendicular,
		3=Arc Tangent, 4=Line Arc Tangent.
Length	M	Length of entry move.
Radius	R	Radius of entry arc.
Angle	C	Angle of entry arc.

When you enter a value, the CNC executes the number of passes required to get from the H (StartHgt) to the Z (ZDepth), cutting the B (DepthCut) on each pass.

When you do not enter a J (RoughFeed) or K (FinFeed), the CNC executes feed moves at the current feedrate. J (RoughFeed) controls the feedrate of the roughing cycle. K (FinFeed) controls the feedrate of the finishing cycle.

G-code format: G175

7.2 Canned Cycles

ACU-RITE 3500i 157