Copyright Agilent Technologies, Inc.
No part of this manual may be repro- duced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Agilent Technologies as governed by the United States and international copyright laws.
Manual Part Number
(order as
Edition
Edition 6, March 2002
Edition 5, August 1997
Edition 4, February 1996
Edition 3, May 1994
Edition 2, March 1994
Edition 1, January 1994
Printed in Malaysia
Agilent Technologies, Inc.
815 14th Street S.W.
Loveland, Colorado 80537 U.S.A.
Assistance
Product maintenance agreements and other customer assistance agreements are available for Agilent Technologies
Warranty
The material contained in this document is provided “as is,” and is subject to being changed, with- out notice, in future editions. Further, to the maximum extent permitted by applicable law, Agilent disclaims all warranties, either express or implied with regard to this manual and any information contained herein, including but not limited to the implied warranties of merchant- ability and fitness for a particular purpose. Agilent shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this docu- ment or any information contain- ed herein. Should Agilent and the user have a separate written agreement with warranty terms covering the material in this docu- ment that conflict with these terms, the warranty terms in the separate agreement will control.
Technologies Licenses
The hardware and/or software described in this document are furnished under a license and may be used or copied only in accordance with the terms of such license.
Safety Notices
Do not install substitute parts or perform any unauthorized modifica- tion to the product. Return the product to an Agilent Technologies Sales and Service Office for service and repair to ensure that safety features are maintained.
W A R N I N G
A WARNING notice denotes a hazard. It calls attention to an operating proce- dure, practice, or the like that, if not correctly performed or adhered to, could result in personal injury or death. Do not proceed beyond a WARNING notice until the indicated conditions are fully understood and met.
C A U T I O N
A CAUTION notice denotes a hazard. It calls attention to an operating proce- dure, practice, or the like that, if not correctly performed or adhered to, could result in damage to the product or loss of important data. Do not proceed beyond a CAUTION notice until the indicated conditions are fully understood and met.
products. For assistance, contact your nearest Agilent Technologies Sales and Service Office. Further information is available on the Agilent web site at
www.agilent.com/find/assist.
Trademark Information
Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks of their respective companies.
Certification
Agilent Technologies certifies that this product met its published specifi- cations at the time of shipment from the factory. Agilent Technologies further certifies that its calibration measurements are traceable to the United States National Institute of Standards and Technology, to the extent allowed by that organization’s calibration facility, and to the calibra- tion facilities of other International Standards Organization members.
Restricted Rights Legend
If software is for use in the perform- ance of a U.S. Government prime contract or subcontract, Software is delivered and licensed as “Commercial computer software” as defined in DFAR
or as a “commercial item” as defined in FAR 2.101(a) or as “Restricted computer software” as defined in FAR
Earth ground symbol.
Chassis ground symbol.
W A R N I N G
Only qualified,
W A R N I N G
For continued protection against fire, replace the line fuse only with a fuse of the specified type and rating.
