Agilent Technologies E6385A manual Zzzz Test Demo Mode 0=normal 1=demo, BTS Type 1=SII 2=PCS

Reference

Parameters

894ZZZZ Test Demo Mode [0=normal 1=demo]

]tu— –m”myq±q” —–qouruq— ±tq ]q—± [“r±m”q “–q”m±uzs y“pq4

•Select 0 to cause the Test Software to operate in normal mode.

•Select 1 to cause the Test Software to operate in demonstration (demo) mode. The demo mode will allow you to run the tests without really testing or connecting to a Base Station. This allows you to become familiar with Test Software operation.

For details, see “Demo (Demonstration) Mode” on page 108.

24.BTS Type [1=SII 2=PCS]

This parameter specifies the type of the Base Station to be tested. Select 1 for a

Autoplex Series II Base Station. Select 2 for a PCS Minicell Base Station.

114 Chapter 5

O:\Manuals\E6385A_Cdma\Book\Referenc.fm