Reference
Accessing Test Software Functions
Ozsss–
]tq ruqxp— uz ±tq
| fQefe .bs5Rs– |
Selects the limit(s) with which to compare measured results. Choices includes Upper, Lower, and Both.
The descriptions for the Test Software might be different than shown here.
Selects the pass/fail limit to be edited.
Sets the lower or upper pass/fail limits.
NOTE | The TESTS (Pass/Fail Limits) screen might not be used in the particular Test Software |
| package that you are using, or some fields might not be present, depending on the Test |
| Software application. The message “Access to secure test information denied” will be |
| displayed if the screen is not supported in the Test Software package. |
98 | Chapter 5 |
O:\Manuals\E6385A_Cdma\Book\Referenc.fm