Agilent Technologies E6385A manual Opym Msw fw, Evm

Performing Tests

CDMA Analyzer Test

OPYM Msw fw

]tu— ±q—± —q±— ®– ±tq ]q—± [“r±m”q ±“ ymwq —q©q”mx yqm—®”qyqz±— ymz®mxx4

]tq r“xx“uzs yqm—®”qyqz±— ym nq –q”r“”yqpB

•Channel Power

•Rho (modulation quality). The following measurements are also displayed when Rho is selected:

—Time offset

—Frequency error

—Carrier feedthrough

•EVM

—The following measurements are also displayed when EVM is selected:

—Phase error

—Magnitude error

•Average Power

NOTE	The Rho and EVM measurements should be made with all traffic, paging, and sync
	channels off; only the pilot channel should be transmitting.

Performing Tests

bsws ewu–x–us g

The following specifications and parameters are used when running this test. See

Chapter 5, “Reference,” for descriptions of the specifications and parameters.

bssww E

•19. TX Antenna Port Cable Loss

•21. TX Test Port Cable Loss

ewu–x–us .bs5Rs– X––/E

• None used for this test.

ewwu dw fw

Perform CDMA Analyzer operations as follows:

ew 74 From the Lucent CDMA Tests Main Menu screen, select the Test Selections field. The Test Software will display the Test Selections Menu screen.

ew 84 Select the CDMA Analyzer field.

Chapter 4 73