1 - Quick Reference
Front Panel Annunciators
φ1 | A list is initiated or running. | Prot | Indicates that a channel protection feature is active |
|
|
| on any channel. Press the Prot Clear key to clear |
|
|
| the protection condition. |
CV | The selected input channel is in the | Cal | Calibration mode is ON. Calibration can only be |
| constant voltage (CV) mode. |
| done through the computer interface. |
CC | The selected input channel is in the | Shift | Indicates that the shift key has been pressed. |
| constant current (CC) mode. |
|
|
CR | The selected input channel is in the | Rmt | Indicates that the electronic load is in remote state |
| constant resistance (CR) mode. |
| (either GPIB or |
|
|
| the active key is the Local key. |
Unr | The selected input channel is unregulated. | Addr | The electronic load is addressed to talk or listen. |
Dis | The input is OFF. Press the Input on/off | Err | A remote programming error(s) have occurred. |
| key to turn the input on. |
|
|
Tran | The selected input channel is enabled for | SQR | The electronic load is requesting a service. |
| transient operation. |
|
|
Immediate Action Keys
Input
On/Off
Local
Q
Input
‚
Input
Q
Channel
Shift + Trigger
Protect
Shift + Prot
Clear
Shift + Ident
Meter
A toggle switch that turns the input of the electronic load on or off.
Activates front panel control when the unit is in remote mode (unless a Lockout command is in effect).
Increases the input current (CC), voltage (CV), or resistance (CR) in Meter mode.
Decreases the input current (CC), voltage (CV), or resistance (CR) in Meter mode.
Selects another channel.
Causes an initiate and trigger to occur. Used with transient subsystem or list.
Displays any protection functions that are tripped.
Resets the protection circuit and allows the unit to return to its last programmed state.
Identifies the module installed in the selected channel location. (not available)
Returns the front panel to metering mode from any other mode.
14
