Alliance Laundry Systems 000 BTU, 105, 250 C.F.M, 80 GAS DRYING TUMBLERS ONLY, STEAM DRYING TUMBLERS ONLY, GAS, ELECTRIC OR STEAM DRYING TUMBLERS

Section III

Installation Instructions

RECEIVING INSPECTION

Upon delivery, visually inspect crate carton and parts for any visible shipping damage. If the crate, carton or cover are damaged or signs of possible damage are evident, have the carrier note the condition on the shipping papers before the shipping receipt is signed, or advise the carrier of the condition as soon as it is discovered.

Remove the crate and protective cover as soon as possible and check the items listed on the packing list. Advise the carrier of any damaged or missing articles as soon as possible. A written claim should be filed with the carrier immediately if articles are damaged or missing.

IMPORTANT: Remove the shipping tape from the two back draft dampers located in the exhaust thimble.

MATERIALS REQUIRED (Obtain Locally)

GAS, ELECTRIC OR STEAM DRYING TUMBLERS

•One fused disconnect switch or circuit breaker.

GAS DRYING TUMBLERS ONLY

•One gas shut-off valve for gas service line to each tumbler.

STEAM DRYING TUMBLERS ONLY

•One steam shut-off valve for steam service line to be connected upstream of solenoid steam valve.

•Two steam shut-off valves for each condensate return line.

•Flexible steam hoses with a 125 psig (pounds per square inch gauge) (8.79 kg/sq. cm) working pressure for connecting steam coils. Refer to Figure 9 and Table 3.

•Two steam traps for steam coil outlet to condensate return line.

•Two vacuum breakers for condensate return lines.

M414545 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 17