COIN-OPERATED TUMBLER

1.Energize the electrical circuit to the tumbler at the disconnect switch or the circuit breaker.

2.Open the lint screen panel and check for any accumulated lint on lint screen. Close panel tightly against tumbler frame and lock panel securely.

3.Open the loading door and load the cylinder with laundry. Overloading will result in excessive drying time, wrinkled laundry, and wear to cylinder bearings.

4.Set the TEMPERATURE selector at HIGH (190ºF / 87.5ºC), MEDIUM (162ºF / 72ºC), LOW (140ºF / 60ºC), or anywhere between these settings. The type of fabric being dried will determine the setting.

5.Coin Drop Models

Insert the required number of coins in the coin slot, turn the knob to the right and release it.

Coin Slide Models

Insert the required number of coins in the coin slide, push coin slide mechanism in completely and then release it.

Electronic Control Models

Refer to Electronic Control Supplemental manual provided with tumbler.

IMPORTANT: If the loading door is opened during the cycle, the heating system will shut off and the motor will stop. However, the timer will continue to run. To restart the cycle, the door must be closed and the PUSH-TO-START button must be pressed in and held for approximately three seconds.

6.When the cycle is completed, open door and remove the laundry.

52

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

M414545