Alliance Laundry Systems 000 BTU, 105, 250 C.F.M, 80 DRYING LAUNDRY, STATUS LIGHTS, SIGNAL AND REVERSING

STATUS LIGHTS, SIGNAL AND REVERSING

DOOR OPEN	Lights when door is open.
	Note: Display window also flashes.
DRYING	Lights when laundry is drying.
COOL DOWN	Lights when laundry is cooling.
CUSTOM	Lights when a Custom cycle is pro-
	grammed, recalled or running.
SIGNAL	When lit, the signal will sound when
	the laundry is ready for removal.
	The signal has three loudness levels.
	These can be set anytime the control
	is activated. Pressing the SIGNAL
	pad once produces the softest tone.
	Additional presses produce louder
	tones. The fourth press turns tone
	and light off. The loudness level
	selected is for all cycles until
	changed.
	When the signal is on and any key
	pad is pressed, it sounds at the
	selected level to confirm the pad was
	properly pressed.
REVERSING	When lit, the cylinder will rotate
(For Reversing	in one direction for 25 seconds,
Models only)	pause for 6 seconds, then rotate in
	opposite direction for 25 seconds.
	This sequence will repeat until the
	selected cycle ends. To turn Revers-
	ing option off, press the REVERS-
	ING pad. (Any time reversing pad is
	pressed, the cylinder will pause for 6
	seconds.)

STATUS Lights

Figure 26

DRYING LAUNDRY

1.LOAD TUMBLER –

Open loading door. Shake out laundry and place in tumbler.

2.CLOSE DOOR –

Tumbler will not operate with open door.

WARNING

To reduce the risk of bodily injury, the tumbler stops tumbling when the door is opened. Do not use the tumbler if it does not stop tumbling when the door is opened or starts tumbling without pressing the START pad. Remove the tumbler from use and call for service.

W078

NOTE: Do not press directly on lights or the center of pad. For proper selection, press on pad slightly to the right of center.

56 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT M414545