B.Time Dry and No Heat

After fabric selection, press the TIME pad. Refer to Figure 29.

TIME DRY Pads

Figure 29

A preset drying time, “Td:**” will replace

“A0:00” in the display. This time can be changed by pressing the MORE or LESS pads. For 1 minute changes, press pad and release. For 5 minute changes, press pad and hold. Maximum drying time allowed is 60 minutes.

Cycles

Preset Time

Range

 

 

 

COTTONS

35 Min

1-60 Min.

 

 

 

PERM PRESS

20 Min

1-60 Min.

 

 

 

MIXED

15 Min

1-60 Min.

 

 

 

DELICATES

30 Min

1-60 Min.

 

 

 

NO HEAT

20 Min.

1-60 Min.

 

 

 

Table 10

AC:** will be displayed when tumbler is in Auto Cool Down. Typical cool down times for fabric selections are preset. Refer to Table 9. The cool down time can only be altered before cycle is started. To alter cool down time press the COOL DOWN pad and then press the MORE or LESS pad (when cool down time is altered, TC:** will be displayed). For 1 minute changes, press pad and release. For 5 minute changes, press pad and hold. Cooling time can be from 1 to 39 minutes. To return to the Auto Cool Down, press MORE or LESS pad until AC:** is displayed.

To start the cycle, press START. The total drying time plus cool down time will display. During the cycle, remaining time displays.

NO HEAT is a time dry cycle only. When NO HEAT is pressed, a 20 minute preset time will display. This can be changed from 1 minute to 60 minutes by pressing the MORE or LESS pads before pressing START. The COOL DOWN pad does not work in NO HEAT cycles.

C.Special Cycle Mode

This allows the user to select the number of times the tumbler will cycle from heat-on to heat-off. To enter the Special Cycle Mode, press the SPECIAL CYCLE pad after selecting a cycle. The display will read “SC:**”. “**” is the number of times the tumbler will cycle from heat-on to heat-off. This number can be changed by pressing the MORE or LESS pads. For increments of 1, press pad and release. For increments of 5, press pad and hold for 3 seconds. Range is from 1-99.

Press the START pad and the number shown after “SC:” is the number of cycles selected, the number will decrease as each cycle is completed. The default cool-down cycle for the Special Cycle Mode is Automatic Cool Down.

NOTE: Since there is only 60 minutes of cycle time, any cycles not completed within 60 minutes will be skipped.

NOTE: Unlike the Time Dry mode and Automatic mode, the regulating temperature in the Special Cycle Mode has a range of 80°F to 180°F for all heat cycles.

58

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

M414545