Allied Telesis X8112 manual 115

SwitchBlade x8112 Chassis Switch Installation Guide

Figure 70. Tightening the Thumb Screws on the AT-SBx81CFC400 Card

10.Tighten the screws with a # 2 Phillips-head screwdriver to secure the controller card to the chassis.

Allied Telesis recommends tightening the screws to 5 inch-lbs.

11.if you have a second AT-SBx81CFC400 Controller Fabric Card, repeat this procedure to install it in the chassis.

12.Go to “Installing the Ethernet Line Cards” on page 116.

115