SwitchBlade x8112 Chassis Switch Installation Guide

Figure 75. Tightening the Thumb Screws on an Ethernet Line Card

8.Tighten the two screws with a # 2 Phillips-head screwdriver to secure the line card to the chassis.

Allied Telesis recommends tightening the screws to 5 inch-lbs.

9.Repeat this procedure to install the remaining Ethernet line cards.

10.After installing the line cards. go to “Installing the Blank Slot Covers” on page 120.

119

Page 119
Image 119
Allied Telesis X8112 manual 119