Chapter 6: Installing the Transceivers and Cabling the Ports

Note

If you are ready to attach the fiber optic cable to the transceiver, continue with the next step. Otherwise, repeat steps 1 to 4 to install the remaining SFP transceivers in the line cards.

5.Remove the protective cover from the SFP transceiver, as shown in Figure 83.

Figure 83. Removing the Dust Cover from the SFP Transceiver in the AT-

SBx81GS24a Line Card

Note

The dust cover protects the fiber optic port on the SFP transceiver from dust contamination. It should not be removed until you are ready to connect the fiber optic cable.

130

Page 130
Image 130
Allied Telesis X8112 manual 130