SwitchBlade x8112 Chassis Switch Installation Guide

Figure 114. Connecting the Positive (+) Power Wire with a Straight

Terminal

7.With a #3 Phillips-head screwdriver, connect the negative (-) power lead wire to the negative terminal on the power supply, with the remaining terminal screw removed in step 5. The negative terminal is on the right. You may attach the terminals with the wires either above or below the terminal block. Figure 115 on page 162 shows the wires above the terminal block.

Allied Telesis recommends tightening the screw to 30 to 40 inch-lbs.

161

Page 161
Image 161
Allied Telesis X8112 manual 161