Allied Telesis X8112 manual Show Card Command

Chapter 8: Verifying the Hardware Operations of the Chassis

swplus# show version

AlliedWare Plus (TM) 5.4.2

Build name : SBx81CFC400-5.4.3.rel	Software Version
	Number
Build date : Wed Jun 2 12:13:19 NZDR 2013
Build type : RELEASE
NEW-SNMP SNMP agent software

(c)1996, 1998-2000 The Regents of the University of California. All rights reserved;

.

.

.

Figure 131. SHOW VERSION Command

2.Compare the version number displayed by the SHOW VERSION command with the information in Table 19 on page 61 to confirm that the version of the AlliedWare Plus Operating System on the controller card supports all the hardware components in the chassis. If necessary, update the management software on the controller card.

3.To display the status of the power supplies, fan module, and AT- SBx81CFC400 Control Cards, use the SHOW SYSTEM ENVIRONMENT command in the User Exec or Privileged Exec mode. The Status column in the display provides the states of the modules. Components are operating normally when they have an “Ok” status.

4.To display the status of the line cards, use the SHOW CARD command in the Privileged Exec mode A line card has a state of “Online” when it is operating normally. An example of the status information is shown in Figure 132.

awplus# show		card
Slot	Card	Type	State

---------------------------------------------------

1	AT-SBx81GP24	Online
2	AT-SBx81XS6	Online
3	AT-SBx81GP24	Online
4	AT-SBx81GS24a	Online
5	AT-SBx81CFC400	Online (Active)
6	AT-SBx81CFC400	Online (Standby)
7	AT-SBx81GP24	Online
8	AT-SBx81GS24a	Online
9	AT-SBx81GP24	Online
10	AT-SBx81XS6	Online
11	AT-SBx81GP24	Online
12	AT-SBx81GS24a	Online

Figure 132. SHOW CARD Command

184