Allied Telesis X8112 manual 213

SwitchBlade x8112 Chassis Switch Installation Guide

Figure 142. Reinstalling the Screws on the Positive and Negative

Terminals

8.Slide the plastic cover to the left and lightly tighten the two screws to secure it in place. Refer to Figure 143 on page 214.

Caution

Do not over tighten the screws or you may crack or break the plastic cover.

The plastic cover may not be present if the lead wires were connected to the terminal block with the right angle terminals. If this is the case, you may either skip this step or reinstall the plastic cover on the power supply.

213