Chapter 4: Installing the Power Supplies

4.Check the power supply for its model name, shown in Figure 46, to verify the module.

If the module is the AT-SBxPWRPOE1 PoE Power Supply, do not continue with this procedure. Instead, perform “Installing the AT- SBxPWRPOE1 PoE Power Supply” on page 95.

Figure 46. Verifying the AT-SBxPWRSYS1 Power Supply

5.Move the locking handle on the AT-SBxPWRSYS1 Power Supply to the unlocked or up position. See Figure 47.

Figure 47. Unlocking the Handle on the AT-SBxPWRSYS1 Power Supply

92

Page 92
Image 92
Allied Telesis X8112 manual Unlocking the Handle on the AT-SBxPWRSYS1 Power Supply