Allied Telesis X8112 manual 145

SwitchBlade x8112 Chassis Switch Installation Guide

Figure 95. Securing the Power Cord for the AT-SBxPWRSYS1 AC Power

Supply to an Anchor

4.Connect the power cord to an appropriate AC power source to power on the power supply.

5.If the chassis has two AT-SBxPWRSYS1 AC System Power Supplies, repeat this procedure to power on the second power supply.

After powering on the AT-SBxPWRSYS1 AC System Power Supplies, do one of the follow:

If the chassis has AT-SBxPWRPOE1 PoE Power Supplies, perform the procedure in “Powering On the AT-SBxPWRPOE1 Power Supply” on page 146.

Otherwise, go to “Monitoring the Initialization Process” on page 175.

145