Allied Telesis X8112 manual Installing AT-SP10TW Cables in the AT-SBx81XS6 Line Card

Chapter 6: Installing the Transceivers and Cabling the Ports

Installing AT-SP10TW Cables in the AT-SBx81XS6 Line Card

This procedure explains how to connect AT-SP10TW Cables to the AT- SBx81XS6 Line Card. The cables may be used in place of fiber optic cables and transceivers for 10 Gbps links of up to 7 meters.

Note

The AT-SP10TW Cable is only supported in the AT-SBx81XS6 Line

Card. It is not supported in the AT-SBx81GS24a Line Card.

To install the AT-SP10TW Cable, perform the following procedure:

1.Remove the dust plug from the SFP+ slot chosen for the cable, as shown in Figure 90.

Figure 90. Removing the Dust Cover From an SFP+ Slot in the AT-

SBx81XS6 Line Card

136