AMX MVP-8400i Image Caching Page Elements, Setup Pages, Back, Connection Status icon, Enable

Setup Pages

The elements of this page include:

Image Caching Page Elements

Back:	Saves all changes and returns to the previous page.
Connection Status icon:	The icon in the upper-right corner of each Setup page shows online/offline state
	of the panel to the master.
	• Bright red - disconnected
	• Bright green - connected. Blinks when a blink message is received to dark
	green every 5 seconds for half a second then go back to bright green.
	• Bright yellow - panel missed a blink message from the master. It will remain
	yellow for 3 missed blink messages and then turn red. It will return to green
	when a blink message is received.
	Note: A Lock appears on the icon if the panel is connected to a secured
	NetLinx Master.
Image Cache Settings:	Allocates Flash memory for image caching.
Flash Cache Size
	Press the Up and Down arrows to add and remove memory. Flash memory
	allocation cannot exceed the amount of Flash memory on the panel.
Flash/RAM Cache Expires	Press the Up and Down arrows to change the amount of time the images stay
	in cache memory. The options are:
	• Never
	• 2 Hours
	• 8 Hours
	• 1 Day
	• 2 Days
	• 5 Days
Enable:
	Press this button to toggle the image Flash cache option On and Off.
Clear Cache:	Press this button to clear both the Flash and RAM cache of all stored images.
Image Cache Status:	The status of the memory available versus in use.
RAM Max Size
	The maximum amount of memory available for all image caching.
RAM Current Size
	The memory that is currently in use for caching static and dynamic images.
RAM Hit Rate
	The percentage of image requests (static and dynamic) satisfied by accessing
	the cache.
	100 * (# of cache hits) / (# of cache hits + # of cache misses)
	# of cache hits - the number of times an image was requested that the image
	was found in the cache. If your hit rate is low, you may want to consider
	enabling Flash cache.
	# of cache misses - the number of times an image was requested that the
	image could not be found in the cache, and the image had to either be loaded
	from flash or obtained via the network (for dynamic images). It is considered a
	RAM Cache Miss even if the image is subsequently found in flash cache.
Items in Cache (RAM)
	The number of images that are currently stored in the RAM cache.
Flash Current Size
	The maximum flash space allocated for image caching. Flash space is used for
	caching only when there is not enough available memory in the RAM cache for
	a newly requested image (it is used only for dynamic images).
Flash Hit Rate
	The percentage of image requests (dynamic only) that are satisfied by
	accessing the flash cache.
	100 * (# of flash cache hits) / (# of flash cache hits + # of flash cache misses)
	# of flash cache hits - # of times a dynamic image could not be found in RAM
	cache but was found in flash cache
	# of flash cache misses - # of times a dynamic image could not be found in
	either RAM or flash cache. RAM cache hits are not relevant in this calculation.
Items in Cache (Flash)
	The number of images that are currently stored in the Flash cache.

MVP-8400i Modero Viewpoint Wireless Touch Panels 91