AMX MVP-8400i manual Open Clear Text Settings, Save/Cancel

Setup Pages

Open (Clear Text) Settings

Press the Open (Clear Text) button to open the Open (Clear Text) Settings page (FIG. 57).

FIG. 57 Wireless Settings page - Open (Clear Text) Settings

Open security does not utilize any encryption methodology, but requires an SSID (alpha-numeric) entry. This entry must match the Network Name (SSID) entry of the target WAP so the panel knows what device it is using to communicate with the network.

Open (Clear Text) Settings

SSID (Service Set Identifier):	Opens an on-screen keyboard to enter the SSID name used on the target
	WAP.
	The SSID is a unique name used by the WAP, and is assigned to all panels
	on that network. An SSID is required by the WAP before the panel is permit-
	ted to join the network.
	• The SSID is case sensitive and must not exceed 32 characters.
	• Make sure this setting is the same for all points in your wireless network.
	• NXA-WAP200Gs use AMX as their default SSID.
	• If this field is left blank, the panel will attempt to connect to the first available
	WAP.
Save/Cancel:	• Save - store the new security information, apply changes, and return to the
	previous page.
	• Cancel - discard changes and return to the previous page.

Refer to the Configuring a Wireless Network Access section on page 21 for further details on these security options.

Refer to the Using the Site Survey tool section on page 22.

72 MVP-8400i Modero Viewpoint Wireless Touch Panels