AMX manual MVP-8400i Specifications FG5965-04 Cont, Power Modes, Battery Duration, per battery

MVP-8400i Modero Viewpoint Wireless Touch Panel With Intercom

MVP-8400i Specifications (FG5965-04) (Cont.)

Power Modes:	• ON: Panel is fully functional.
	• STANDBY: Panel uses low power, the LCD/backlight is shutdown, LEDs still
	function. Panel resumes the ON mode in ~ 1 second.
	• OFF: On-board programs not running, touch screen still powered, LED not
	functional. Panel resumes the ON mode in ~ 30 seconds.
Battery Duration:	• Eight hours of normal use (25% On state, 25% Standby, and 50% Off).
(per battery)	• Four hours of continuous use (continuous On state).
	The MVP-8400i panel is shipped with two MVP-BP batteries. You must use
	both batteries to obtain the duration times given above.
Memory (factory default):	• 128 MB SDRAM
	• 128 MB Compact Flash (upgradable to 1 GB) - factory programmed
Weight:	1.85 lbs (0.84 kg)
	• with 1 battery: 2.25 lbs (1.02 kg)
	• with 2 batteries: 2.65 lbs (1.20 kg)
MVP-8400i LCD	• Aspect ratio: 4 x 3
Specifications:	• Brightness (luminance): 180 cd/m2
	• Channel transparency: 8-bit Alpha blending
	• Contrast ratio: 350:1
	• Display colors: 256K colors (18-bit color depth)
	• Dot/pixel pitch: 0.21 mm
	• Panel type: TFT Color Active-Matrix
	• Screen resolution: 800 x 600 pixels (HV) @ 60 Hz frame frequency
	• Viewing angles (vertical): + 60° / - 40° (from center)
Active Screen Area:	• 6.71” x 5.03” (17.04cm x 12.78cm)
External Components:
Docking station interface	Metallic strip connector located on the bottom panel provides communication
connector:	and power between the panel and the optional docking stations.
LEDs:	Two sets of NetLinx programmable LEDs (supporting On, Off, and Blink).
	Default blink patterns:

-Stylus LED: Blink = Batteries charging, On = Batteries charged.

-Front panel LED: Blink = Panel booting, On = Panel operating properly.

Mini-USB connector: 5-pin mini-USB connector for programming, firmware update, and file transfer.

Power connector:• 2.1mm barrel-style power jack, for use with the included PS4.4 power supply.

Stylus slot:	• Illuminated slot where the included stylus is stored, located on the left side of
	the MVP.
External Buttons:	• Nine programmable pushbuttons (four located on the left of the LCD and five
	located on the right in a joystick configuration).
Internal Components:
Wireless Interface card:	Provides 802.11 (CF Type I) wireless connectivity between the panel and a
	Wireless Access Point (such as the NXA-WAP200G).
IR Emitters:	Transmit IR over 20 feet (6.10 m).
Internal speaker:	Single 2 watt speaker.
Internal microphone	For use with the intercom feature
Battery compartment:	Houses up to 2 MVP-BP Power Packs.

MVP-8400i Modero Viewpoint Wireless Touch Panels 3