AMX MVP-8400i manual Automatically set SSID, Select Wireless Settings

Configuring Communications

Configuring the Modero’s wireless card for secured access to a WAP200G

After logging into the WAP200G, the default Status page appears within the web browser. These read-only values are "pulled" from some of the other user-configurable Configuration Utility pages. By default, wireless Modero panels are configured for unsecured communication to a Wireless Access Point. To properly setup both the WAP200G and panel for secure communication, you must first prepare the Modero panel and then use the information given to fill out the fields within the WAP’s browser-based Basic Wireless Configuration page.

Since the code key generator on Modero panels use the same key generation formula, all panels will generate identical keys for the same Passphrase. The generators used on WAPs will not produce the same key as the Modero generator even if you use the same Passphrase. For this reason, we recommend

FIRST creating the Current Key on the Modero and then entering that information into the appropriate NXA-WAP200G fields.

Automatically set SSID

In the Protected Setup page:

1.Select Wireless Settings.

2.Press the Site Survey button.

3. Select a WEP secured WAP from within the Site Survey page, and press the Connect button .

Select a target WAP with the desired level of security

Connecting to the WAP begins the communication

FIG. 20 Site Survey of available WAPs (Secured WAP shown selected)

4.Write down the SSID name, Current Key string value, and panel MAC Address information so you can later enter it into the appropriate WAP dialog fields in order to "sync-up" the secure connection. These values must be identically reproduced on the target WAP.

MVP-8400i Modero Viewpoint Wireless Touch Panels 27