AMX MVP-8400i manual EAP-PEAP Settings, EAP-FAST Settings Cont

Setup Pages

EAP-FAST Settings (Cont.)

PAC File Location:	This field is used when the previous Automatic PAC Provisioning option has
	been Disabled.
	• When pressed, the panel displays an on-screen PAC File Location
	keyboard which allows you to enter the name of the file containing the PAC
	shared secret credentials for use in authentication.
	• This field is only valid when the automatic PAC provisioning feature has
	been enabled via the previous field.
Save/Cancel:	• Save - store the new security information, apply changes, and return to the
	previous page.
	• Cancel - discard changes and return to the previous page.

Refer to the EAP Authentication section on page 173 for further details on these security options.

Refer to the Using the Site Survey tool section on page 22 for more information on using this feature.

EAP-PEAP Settings

Press the EAP-PEAPbutton to open the EAP-PEAP Settings page (FIG. 63).

FIG. 63 Wireless Settings page - EAP-PEAP Settings

PEAP (Protected Extensible Authentication Protocol) was developed as a way to securely transmit authentication information, such as passwords, over a wireless network environment. PEAP uses only server-side public key certificates and therefore does not need a client (panel) certificate which makes the configuration and setup easier.

There are two main versions of the PEAP protocol supported by panel’s DeviceScape Wireless Client:

PEAPv0

PEAPv1

PEAP uses inner authentication mechanisms supported by the DeviceScape Wireless Client, the most common of which are:

MSCHAPv2 with PEAPv0

GTC with PEAPv1

80 MVP-8400i Modero Viewpoint Wireless Touch Panels