AMX MVP-8400i manual Cfsm, Cex, Icm-Mutemic, Icm-Speakerlevel

Programming

Panel Setup Commands

^CFSM	Syntax:
Sets the Flash cache to	“’^CFSM’”
the	Variable:
maximum
	There is no parameter for this command.
available size allowed
for backup Flash cache.	Example:
(determined by taking	SEND_COMMAND Panel, “’^CFSM’”
75% of free Flash	Modifies the Flash cache size to the maximum available size for the device.
space)
^CEX	Syntax:
Changes the default	“’^CEX-<time index>’”
expiration time for	Variable:
entries in the image
	time index:
cache (applies to both
primary RAM cache and	• 1 = 2 Hours
backup Flash cache).	• 2 = 8 Hours
The default
	• 3 = 1 Day
expiration time applies
	• 4 = 2 Days
to dynamic images only.
	• 5 = 5 Days
	• 0 = NEVER
	Example:
	SEND_COMMAND Panel, “’^CEX-4’”
	Changes the default expiration time to 2 Days.
^DLD	Syntax:
Set the disable cradle	“’^DLD-<0/1>’”
LED flag.	Variables:
	0 - LEDs operate normally
	1 - Cradle LEDs operate dim setting only
	Example:
	SEND_COMMAND Panel, “’^DLD-1’”
	Sets the cradle LEDs to the dim setting.
^ICM-MUTEMIC	Syntax:
Set the state of the	"'^ICM-MUTEMIC,<state>'"
microphone on a panel	Variables:
to muted (1) or unmuted
(0). At the start of each	0 - unmuted
	1 - muted
call the microphone
starts out unmuted.	Example:
	SEND_COMMAND Panel, “^ICM-MUTEMIC,1”
	Sets the microphone to muted.
^ICM-SPEAKERLEVEL	Syntax:
Set the speaker level	"'^ICM-SPEAKERLEVEL,<level>'"
during an intercom call.	Variables:
	0 - 100 volume levels
	Example:
	SEND_COMMAND Panel, “^ICM-SPEAKERLEVEL,55”
	Sets the speaker volume level to 55.

MVP-8400i Modero Viewpoint Wireless Touch Panels 151