AMX MVP-8400i manual RAF-resource name,data

Programming

Dynamic Image Commands (Cont.)

^RAF

Add new resources.

Adds any and all resource parameters by sending embedded codes and data. Syntax:

"'^RAF-<resource name>,<data>'"

Variable:

resource name = 1 - 50 ASCII characters.

data = Refers to the embedded codes, see table below.

	Embedded Codes:
	Parameter	Embedded Code	Description
	protocol	’%P<0-1>’	Set protocol. HTTP (0) or FTP (1).
	user	’%U<user>’	Set Username for authentication.
	password	’%S<password>’	Set Password for authentication.
	host	’%H<host>’	Set Host Name (fully qualified
			DNS or IP Address).
	file	’%F<file>’	Full path to the location of the file or
			program that will return the resource.
			The path must be a valid HTTP URL
			minus the protocol and host. The
			only exception to this is the inclusion
			of special escape sequences and in
			the case of the FTP protocol, regular
			expressions.
	path	’%A<path>’	Set Directory path. The path must
			be a valid HTTP URL minus the
			protocol, host, and filename. The
			only exception to this is the
			inclusion of special escape
			sequences and in the case of the
			FTP protocol, regular expressions.
	refresh	’%R<refresh 1-65535>’	The number of seconds between
			refreshes in which the resource is
			downloaded again. Refreshing a
			resource causes the button
			displaying that resource to refresh
			also. The default value is 0 (only
			download the resource once).
	newest	’%N<0-1>’	Set the newest file. A value of 1
			means that only the most recent file
			matching the pattern is downloaded.
	preserve	’%V<0-1>’	Set the value of the preserve flag.
			Default is 0. Currently preserve has
			no function.
Example:

SEND_COMMAND Panel,"'^RAF-New Image,%P0%HAMX.COM%ALab/ Test_file%Ftest.jpg'"

Adds a new resource. The resource name is ’New Image’, %P (protocol) is an HTTP, %H (host name) is AMX.COM, %A (file path) is Lab/Test file, and %F (file name) is test.jpg.

154 MVP-8400i Modero Viewpoint Wireless Touch Panels