AMX MVP-8400i manual Protected Setup Navigation Buttons, Options, System Recovery, Reboot Panel

Setup Pages

Protected Setup Page (Cont.)

Options:		• Function Show - toggles the display of the channel port, channel code, level
		port and level code on all touch panel buttons (see FIG. 52).
		• Page Tracking - toggles the page tracking function. When enabled, the panel
		reports page data to the NetLinx Master.
		• Telnet - enables/disables the panel’s telnet server (to allow direct telnet
		communication to the panel).
		• Front Button Setup Access - activates the two lower buttons on the front of
		the panel for accessing the Setup and Calibration pages (see FIG. 42 on
		page 51). The default setting is On.
		- Press and hold these buttons for 3 seconds to access the Setup page.
		- Press and hold these buttons for 6 seconds to access the Calibration page.
System Recovery:		• Reset System Settings - deletes all of the current configuration parameters
		on the panel (including IP Addresses, Device Number assignments,
		Passwords, and other presets). This option invokes a Confirmation dialog,
		prompting you to confirm your selection before resetting the panel.
System Recovery (Cont.):		• Remove User Pages - allows you remove all TPD4 touch panel pages
		currently on the panel, including the pre-installed AMX Demo pages. This
		option invokes a Confirmation dialog, prompting you to confirm your selection
		before removing the panel pages.
		Note that the YES button on the Confirmation dialog is disabled for 5 seconds
		as additional protection against accidentally resetting the panel or removing
		the panel pages.
Reboot Panel:		Pressing this button causes the panel to reboot after saving any changes.
Docking Station:		• Dock Status - illuminates when the MVP is docked and communicating with
		the Docking Station.
		• Undock Panel - forces the docking station to release the MVP without
		requiring a User Access username or password.
		• Disable Docking Station LED - disables the display of the LEDs on the
		docking station.
Channel Code
Channel Port
	3,132

BUTTON

2,8 3,50

Level Port

Channel Code

FIG. 52 Function Show example

Address Port Address Code

Protected Setup Navigation Buttons

The Protected Setup Navigation Buttons (FIG. 53) appear on the left of the panel screen when the Protected Setup page is currently active.

64 MVP-8400i Modero Viewpoint Wireless Touch Panels